Installing The Front Window Shaft Seal

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying ↓Position Of Front Window Shaft Seal

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

NOTE: Dirty door window glass installed

Risk of irreparable damage to front window channel seal

→ During installation, make sure that no lubricant from the window guides gets on to the door window glass.

→ Clean the door window glass and check that the front window channel seal is clean.

→ Replace damaged window channel seal.

Information

Make sure horizontal alignment is correct (Arrows C, D).

Attach front window shaft seal -1- - starting at the front end -Arrow A- - to the sheetmetal door flange -2- from above -Arrow B- .

Fig 2: Identifying Installing Front Window Shaft Seal
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Close the front door window -1- fully.

Fig 3: Closing Front Door Window
Courtesy of PORSCHE CARS NORTH AMERICA, INC.