LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (64 - Glazing, Window Control -- CARRERA (997)) >> WM 644049 Reworking (Coating) Front Door Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Preliminary Work >> Cleaning Window Surfaces

Cleaning Window Surfaces

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The window must be coated immediately after being polished.

  1. Clean the window using commercially available glass cleaner.
  2. Shake the polish well before use.
  3. Dampen polishing cloths with water, apply polish and buff for several minutes.
  4. Allow the film of polish to dry and then wipe it off completely.
scientia non olet · About LEMON Manuals