LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (64 - Glazing, Window Control -- CARRERA (997)) >> WM 644019 Removing And Installing Front Door Window (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Installing Front Door Window >> Notes

Installing Front Door Window: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Dirty door window glass installed
  • Risk of irreparable damage to front window channel seal

→ During installation, make sure that no lubricant from the window guides gets on to the door window glass.

→ Clean the door window glass and check that the front window channel seal is clean.

→ Replace damaged window channel seal.

Fig 1: Identifying Position Of Front Door Window
G09826568Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Insert front door window -1-  into the door channel -Arrows-  and position in the clamping jaws -2-  .
    Fig 2: Installing Front Door Window
    G09826569Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Press the door window down as far as it will go -Arrow-  into the clamping jaws.