Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening screw on front mounting piece (door window lifter) | Tightening torque | 8.5 Nm (6 ftlb.) | +/-1.5 Nm (+/- 1 ftlb.) | ||
| Fastening screw on rear mounting piece (door window lifter) | Tightening torque | 8.5 Nm (6 ftlb.) | +/-1.5 Nm (+/- 1 ftlb.) | ||
| Window lifter to inner edge of door | Adjustment value | 45 mm | +/-1 mm | ||
| Fastening nut securing bottom of window lifter to door | Tightening torque | 10 Nm (7.5 ftlb.) | |||
| Roof frame seal to front door window | Control dimension | 4.5 mm | +1.5 mm | ||
| Roof frame seal to rear door window glass | Control dimension (Coupe) | 5 mm | +1.5 mm | ||
| Roof frame seal to rear door window glass | Control dimension (Targa) | 4 mm | +1.5 mm | ||
| Door seal to rear door window glass | Control dimension | 0 mm | +2 mm |