Tools And Materials
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
The following tools and materials are required for removing and installing the windscreen with 2-component adhesive:
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
| Item. |
Designation |
Source |
Explanation |
| -A- |
Double cartridge pistol VAS 5237 WE 1278 |
|
|
| -B- |
Pipette - Stahlwille WE 1140 |
|
|
| -C- |
Special electric cutter - fine WE 1137 |
|
|
| -D- |
Flashing knife, U-type 639.031.130.22 |
|
|
| -H- |
→ ADHESIVE SET |
|
Contains set components H1-H8 |
| Item |
Designation |
| -H1- |
Cleaning solution |
| -H2- |
Primer |
| -H3- |
Activator |
| -H4- |
Swab |
| -H5- |
Cartridge, component A |
| -H6- |
Cartridge, component B |
| -H7- |
Mixing nozzle |
| -H8- |
Processing nozzle |
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
| Item |
Designation |
Source |
Explanation |
| -A- |
Separator for bonded windows V.A.G. 1474 B WE 1187 |
|
Contains set components A1-A9 |
| -B- |
Cutting thread |
|
| Item |
Designation |
| -A1- |
Guide rails |
| -A2- |
Cutting tool (wire holder) |
| -A3- |
Spooling device |
| -A4- |
Awl |
| -A5- |
Guide rails |
| -A6- |
Filler |
| -A7- |
Steering roller with arm bracket |
| -A8- |
Handle |
| -A9- |
Square cutting wire |