LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 150 (64 - Glazing, Window Control -- CARRERA (997)) >> WM 641219 Removing And Installing Windscreen (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Preparing Windscreen For Installation >> Priming The Windscreen

Priming The Windscreen

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Information 

  1. Clean the windscreen with cleaning solution -H1-  .
  2. Apply primer -H2-  to the glass flange in the area of the marking.
    Fig 1: Priming On Windscreen
    G09826512Courtesy of PORSCHE CARS NORTH AMERICA, INC.