Fitting Windscreen Into The Body
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Information
- Two persons are needed to insert and adjust the windscreen.
Information
- Owing to the bonding section, the windscreen can no longer be aligned on the seal because the section immediately adheres to the windscreen when inserted.
- Apply suction cups -B- to the windscreen -5- and insert the windscreen into the window aperture. Press the windscreen -5- up as far as it will go. When doing so, press the lower edge of the glass against the spacer blocks. Mark the windscreen with adhesive tape -6- and remove.