LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Lights, Lamps, Switches Interior, Theft Protection - 911 CARRERA (996)) >> Removing and installing signal converter/immobilizer >> Removal

Removing and installing signal converter/immobilizer: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery and cover terminal or battery.
  2. Remove left side vent (see REMOVING AND INSTALLING MAIN LIGHT SWITCH ).
  3. The signal converter on the ignition steering lock housing can be removed through the opening in the dashboard.
  4. Open the locking button with a (short) cross-head screwdriver (1/4 turn counter-clockwise). Pull the signal converter out of the holder to the rear.
    Fig 1: Opening Locking Button With Screwdriver
    G03063668Courtesy of PORSCHE OF NORTH AMERICA, INC.

    Fig 1 shows the signal converter without dashboard.

  5. Unlock the electrical plug connection from above and disconnect. Remove signal converter housing out of the side vent opening.
    Fig 2: Unlocking Electrical Plug Connection
    G03063669Courtesy of PORSCHE OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals