LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Lights, Lamps, Switches Interior, Theft Protection - 911 CARRERA (996)) >> Removing and installing passenger compartment monitoring sensor >> Removal

Removing and installing passenger compartment monitoring sensor: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a small screwdriver, carefully unclip both cover lenses at the openings provided. Undo fastening screws M 5 with a cross-head screwdriver (arrow A).
  2. Unclip sensor holder at the rear left and right (arrow B), push forward towards the windshield and remove. Pull off electrical plug connection.
    3. Fig 1: Removing Passenger Compartment Monitoring Sensor
    G03063670Courtesy of PORSCHE OF NORTH AMERICA, INC.
  3. Unclip passenger compartment monitoring sensor at the side and remove from the sensor holder.
scientia non olet · About LEMON Manuals