Installing control unit for alarm system
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Only install the control unit with the battery disconnected. See WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY .
CONTROL UNIT FOR ALARM SYSTEM INSTALLATION PROCEDURE
| No. | Procedure | Instructions |
|---|---|---|
| 1 | Inserting the connectors | Insert the connector -2- . See Fig 1 . |
| 2 | Inserting the connectors | Insert connector -4-3- . See Fig 1 . |
| 3 | Screwing control unit tight | Engage the control unit in the opening on the vehicle floor and close the lock -1-direction of the arrow- . See Fig 1 . |
| Installing left front seat | ||
| Refer to REMOVING AND INSTALLING FRONT SEAT, - AS OF MY 1996 | ||