LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Lights, Lamps, Switches Interior, Theft Protection - 911 CARRERA (996)) >> Removing and installing bulb for interior light >> Removal

Removing and installing bulb for interior light: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Carefully pull the interior light out of the trim panel from the front (arrow).
    Fig 1: Pulling Interior Light Out Of Trim Panel From Front
    G03063675Courtesy of PORSCHE OF NORTH AMERICA, INC.
  2. Remove bulb of reading light. Undo the bulb holder (bayonet lock) and pull out the faulty bulb.
  3. Remove interior light. Carefully unclip the lens on the side of the switch (arrow) and remove.
    Fig 2: Removing Interior Light Bulb
    G03063676Courtesy of PORSCHE OF NORTH AMERICA, INC.
  4. Remove the faulty bulb from between the contact springs.
scientia non olet · About LEMON Manuals