LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Lights, Lamps, Switches Interior, Theft Protection - 911 CARRERA (996)) >> Removing and installing bulb for instrument cluster >> Removal

Removing and installing bulb for instrument cluster: Removal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2005 Porsche 911, 2004 Porsche 911, 2003 Porsche 911, 2002 Porsche 911, and 2001 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: 1.2 and 1.5 watt bulbs can be removed and installed without opening the rear side of the instrument cluster.
    1. Removing and installing instrument cluster: Refer to REMOVING AND INSTALLING INSTRUMENT CLUSTER .
    2. Undo the bulb holder with a small screwdriver (bayonet lock).
      Fig 1: Identifying Instrument Cluster Bulb Holder
      G03063677Courtesy of PORSCHE OF NORTH AMERICA, INC.
    3. Take out the faulty bulb. The bulb and bulb holder make up one spare part.
    NOTE: If the instrument cluster is open, interior 1.5 and 3 watt bulbs can be removed from and installed in the display unit in the same order of procedure. Disassembling and assembling instrument cluster: Refer to DISASSEMBLING AND ASSEMBLING INSTRUMENT CLUSTER .
    Fig 2: Identifying Instrument Cluster Bulbs
    G03063678Courtesy of PORSCHE OF NORTH AMERICA, INC.
    scientia non olet · About LEMON Manuals