LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (57 - Door Front, Central Locking System -- CARRERA (997)) >> WM 577819 Removing And Installing Central Locking Switch (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Removing Central Locking Switch

Removing Central Locking Switch

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

The central locking switch is located in the center air vent.

Fig 1: Overview Of Switch For Central Locking
G09824349Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. With a screwdriver through the top air slot, release the left and right retaining clip -A-  and pull the air vent out of the dashboard.
    Fig 2: Releasing Air Vent
    G09824350Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Pull apart the electrical plug connections and remove the air vent.
    Fig 3: Pulling Electrical Connectors
    G09824351Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Unclip and take off central locking switch from the air vent.