LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (57 - Door Front, Central Locking System -- CARRERA (997)) >> WM 575119 Removing And Installing Door (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Removing Door >> Releasing Hinge Joint

Releasing Hinge Joint

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Door
G09824271Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unscrew fastening screws -1-  on hinge joint -2-  . Support the doors if necessary to prevent damage. → Master Wheel 50 T wheel mounting trolley with door removal device  can be used to do this.
    Fig 2: Identifying Hinge Joint
    G09824272Courtesy of PORSCHE CARS NORTH AMERICA, INC.