LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 148 (57 - Door Front, Central Locking System -- CARRERA (997)) >> WM 573019 Removing And Installing Door Unit Carrier (Except 911 Turbo S Coupe "Ed. 918 SPYDER", 911 CARRERA 4 GTS, 911 Turbo S CABRIO "Ed. 918 SPYDER", 911 CARRERA 4 GTS CABRIO, 911 Gt3 RS 4.0) >> Installing Door Unit Carrier >> Removing Adhesive Tape

Removing Adhesive Tape

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Door Unit Carrier
G09824247Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Remove adhesive tape, clean marked area if necessary.
    Fig 2: Identifying Adhesive Tape Applying Area
    G09824248Courtesy of PORSCHE CARS NORTH AMERICA, INC.