LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (92 - Windshield Wiper And Washer System -- CARRERA (997)) >> WM 921519 Removing And Installing Wiper Motor (All Except 911 Gt3 RS 4.0) >> Removing wiper motor

Removing wiper motor

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Unscrew the fastening nut -1-  for the wiper link drive and remove the drive.
    Fig 1: Removing Wiper Link Drive
    G09827531Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew the three fastening screws -2-  for the wiper motor and the fastening screw -3-  for the wiper link.
  3. Carefully raise the wiper link and remove the wiper motor downwards.
    Fig 2: Removing Wiper Motor In Downward Direction
    G09827532Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Unlock the electric connector a and pull it out of the wiper motor.
scientia non olet · About LEMON Manuals