LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (45 - Anti Lock Brake (Abs) -- CARRERA (997)) >> WM 455919 Removing And Installing Rotation-Rate Sensor For PSM (All Models) >> Subsequent work

Subsequent work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. After installing the rotation-rate sensor, read out the PSM fault memory with the PIWIS Tester (diagnostic tester) and erase it.

    Carry out a static test. Then start the engine. The PSM-related lights in the instrument cluster must go out when the engine is running.

    Read out the PSM fault memory again. There must not be any stored faults.

    Fig 1: Identifying Diagnostic Tester
    G09825987Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals