LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (45 - Anti Lock Brake (Abs) -- CARRERA (997)) >> WM 455919 Removing And Installing Rotation-Rate Sensor For PSM (All Models) >> Removing rotation-rate sensor

Removing rotation-rate sensor

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the left seat back and adjust the steering wheel upwards.
  2. Remove left cover on the centre console.

    Unscrew screw -2-  and take off cover -1-  .

    Fig 1: Identifying Cover In Left Footwell
    G09825984Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Remove rotation-rate sensor.

    Unscrew screws -1-  (the screws -1-  can only be accessed using a 1/4- inch tool). Pull off plug connection and take out rotation-rate sensor.

    Fig 2: Identifying Rotation-Rate Sensor
    G09825985Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals