Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Automatic transmission | - | total capacity | 9 liters | - | - |
| Automatic transmission | - | change quantity | 4.5 liters | - | - |
| ATF drain screw | - | Tightening torque | 22 Nm (16 ftlb.) | - | - |
| Electrohydraulic control unit | - | Tightening torque | 8 Nm (6.0 ftlb.) | - | - |
| ATF pan | - | Tightening torque | 8 Nm (6.0 ftlb.) | - | - |
| Socket | - | Tightening torque | 2.5 Nm (2.0 ftlb.) | - | - |
| Holder for coolant hoses | - | tightening torque | 10 Nm (7.5 ftlb.) | - | - |
| Drive shaft | - | tightening torque | 81 Nm (60 ftlb.) | - | - |
| Automatic transmission | Minimum permitted ATF temperature | ATF temperature | 30°C | - | - |
| Automatic transmission | Maximum permitted ATF temperature | ATF temperature | 40°C | - | - |
| Automatic transmission | ATF high temperature at start of test | ATF temperature | 40 grad Celsius | - | - |
| Automatic transmission | Engagement duration of transmission range | Time | 10 s | - | - |
| Cap nut | - | Tightening torque | 40 Nm (30 ftlb.) | - | - |
| ATF control screw | - | Tightening torque | 22 Nm (16 ftlb.) | - | - |