Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| ATF cooler | - | Tightening torque | 10 Nm (ftlb.) (7.5) | - | - |
| Diagonal brace to cross member | In Figure | Tightening torque | 110 Nm (ftlb.) (81.5) | - | - |
| Diagonal brace to side section | In Figure | Tightening torque | 23 Nm (ftlb.) (17) | - | - |
| Diagonal brace to body | In Figure | Tightening torque | 65 Nm (ftlb.) (48) | - | - |
| Cross member to side section | In Figure | Tightening torque | 110 Nm (ftlb.) (81.5) | - | - |
| Stabilizer to side section | - | Tightening torque | 23 Nm (ftlb.) (17) | - | - |