LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 728719 Removing And Installing Motor For Seat Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Removing Motor For Seat Adjustment

Removing Motor For Seat Adjustment

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installation Position Of Motor For Seat Adjustment
G09829770Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unclip sleeve of long drive shaft -2-  of seat adjustment motor -1-  at the support.
    Fig 2: Removing Driveshaft Sleeve Of Seat Adjustment Motor
    G09829771Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Press motor for seat adjustment -1-  out of the support -2-  at the boot -arrow A-  .
    Fig 3: Pressing Motor For Seat Adjustment Out Of Support
    G09829772Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Pull motor for seat adjustment -1-  off the short drive shaft -arrow B-  .
  4. Pull motor for seat adjustment -1-  forward under the support -2-  (-arrow C-  ) and pull off connector -3-  (-arrow D-  ).
  5. Pull motor for seat adjustment -1-  and sleeve off the long drive shaft -2-  (-arrow A-  ).
    Fig 4: Pulling Motor For Seat Adjustment Off Drive Shaft
    G09829773Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  6. Pull the long drive shaft -2-  out of the gear mount -arrow B-  and check for damage.
  7. Pull the short drive shaft -1-  out of the gear mount -2-  and check for damage.
    Fig 5: Removing Drive Shaft
    G09829774Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals