LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 728619 Removing And Installing Switch For Seat Adjustment (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Removing Switch For Seat Adjustment

Removing Switch For Seat Adjustment

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installation Position Of Seat Adjustment Switch
G09829764Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Carefully unclip the two control buttons -1-  using a plastic wedge.
    Fig 2: Removing Control Buttons
    G09829765Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew the three fastening screws -1-  and remove seat adjustment switch -2-  .
    Fig 3: Removing Switch For Seat Adjustment
    G09829766Courtesy of PORSCHE CARS NORTH AMERICA, INC.