Installing Switch For Seat Adjustment

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Position switch for seat adjustment -2- and screw down using the three fastening screws -1- .

Fig 1: Installing Switch For Seat Adjustment
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Position the two control buttons -1- precisely and carefully press down onto the seat adjustment switch until they are felt to engage.

Fig 2: Installing Control Buttons
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

The assembly clip must be removed in order to install a new seat adjustment switch.
Use a small screwdriver to lever the assembly clip -1- out of the seat adjustment switch -2- .

Fig 3: Removing Assembly Clip
Courtesy of PORSCHE CARS NORTH AMERICA, INC.