LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 724719 Removing And Installing Rear Backrest (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Speedster, Gt3 RS 4.0, Gt3, Gt2, Gt3 RS, Gt2 RS) >> Removing Rear Backrest

Removing Rear Backrest

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press out cover -1-  with a screwdriver.
    Fig 1: Loosening Outer Backrest
    G09829750Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screw -2-  .
  3. Press cover -1-  out to the front.
    Fig 2: Loosening Inner Backrest
    G09829751Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Unscrew fastening screw -2-  .
  5. Release backrest -1-  , lift it out of the mounting saddle -2-  (-arrow A-  ) and then pull it out of the bearing axle -3-  (-arrow B-  ).
    Fig 3: Removing Backrest
    G09829752Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals