Installing Rear Backrest

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Insert backrest -1- into the bearing axle -3- (-arrow A- ) and engage in the mounting saddle -2- (-arrow B- ).

Fig 1: Installing Backrest
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Secure bearing axle -3- with the fastening screw -2- . Tightening torque → Tightening torque: 5.6 Nm (4 ftlb.)
Press in cover -1- .

Fig 2: Securing Backrest On Inside
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Lock backrest, align it and screw in fastening screw -2- on the outer bearing -3- . Tightening torque → Tightening torque: 25 Nm (19 ftlb.)
Press in cover -1- .

Fig 3: Securing Backrest On Outside
Courtesy of PORSCHE CARS NORTH AMERICA, INC.