Technical Values
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Gap between seat shell and backrest shell | Gap dimension | 3 mm | -2 mm | ||
| Fastening nut securing upper part of lock to backrest shell | Tightening torque | 22 Nm (16 ftlb.) | +/-3 Nm (+/- 2 ftlb.) | ||
| Fastening nut securing lower part of lock to seat shell | Tightening torque | 22 Nm (16 ftlb.) | +/-3 Nm (+/- 2 ftlb.) |