LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 722955 Replacing Retainer Plate For Seat Adjustment Motor (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install seat adjustment motor. → Installing Motor For Seat Adjustment 

    Information 

    Only for vehicles with adaptive sports seats.

  2. Install motor and control valve for air cushion.
    Fig 1: Securing Holder With Compressor And Valve For Air Distribution
    G09829672Courtesy of PORSCHE CARS NORTH AMERICA, INC.
    1. 2.1. Position holder -2-  with connected motor and control valve for air cushion -arrow-  .
    2. 2.2. Tighten fastening screws -1-  on the holder -2-  .
  3. Install front seat. → Installing Front Seat 
scientia non olet · About LEMON Manuals