LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 722819 Removing And Installing Height Adjustment Lever (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Removing Height Adjustment Lever

Removing Height Adjustment Lever

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installation Position Of Backrest Adjustment
G09829663Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Press out trim panel -7-  using a plastic spatula.
    Fig 2: Pressing Out Trim Panel
    G09829664Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screw -8-  from the lever -9-  and remove lever.
    Fig 3: Unscrewing Fastening Screw
    G09829665Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals