LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 722819 Removing And Installing Height Adjustment Lever (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Installing Height Adjustment Lever

Installing Height Adjustment Lever

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Installation Position Of Backrest Adjustment
G09829666Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Position lever -9-  on the seat and screw down fastening screw -8-  . Tightening torque → Tightening torque: 5.9 Nm (4.5 ftlb.) 
    Fig 2: Screwing Down Lever
    G09829667Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Press in trim panel -7-  .
    Fig 3: Pressing In Trim Panel
    G09829668Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals