LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 722519 Removing And Installing BOWDEN Cable For Backrest Release (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Installing Bowden Cable For Backrest Release >> Installing Backrest Frame Release

Installing Backrest Frame Release

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press in rubber stop -4-  .
    Fig 1: Installing Backrest Frame Release
    G09829647Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Position backrest frame release -3-  and secure with new retaining pins -2-  .
  3. Engage tension spring -1-  .
scientia non olet · About LEMON Manuals