LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 722419 Removing And Installing Cushion Carrier For Front Backrest (Folding Sports Bucket Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Technical Values

Technical Values

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Location Description Type Basic value Tolerance 1 Tolerance 2
Fastening nut on bearing pin (hinge)   Tightening torque 22 Nm (16 ftlb.) +/-3 Nm (+/-2 ftlb.)  
Fastening screw securing inner hinge trim to bearing pin   Tightening torque 3 Nm (2 ftlb.) +/-0.5 Nm (+/- 0.5 ftlb.)  
scientia non olet · About LEMON Manuals