LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 721955 Replacing Backrest Frame (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Only for vehicles with adaptive sports seats.

  1. Install air cushion for backrest. → Installing Air Cushion For Backrest 

    Information 

    Only for vehicles with lumbar support.

  2. Install motor for lumbar support. → Installing Motor For Lumbar Support 

    Information 

    Only for vehicles with lumbar support.

  3. Install lumbar support. → Installing Lumbar Support 

    Information 

    Only for vehicles with lumbar support.

  4. Install control valve for lumbar support adjustment. → 723319 REMOVING AND INSTALLING CONTROL VALVE FOR LUMBAR SUPPORT ADJUSTMENT 
  5. Install cushion carrier. → Installing Cushion Carrier For Front Backrest 
scientia non olet · About LEMON Manuals