LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 721955 Replacing Backrest Frame (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Preliminary Work

Preliminary Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove cushion carrier. → 722419 REMOVING AND INSTALLING CUSHION CARRIER FOR FRONT BACKREST 

    Information 

    Only for vehicles with lumbar support.

  2. Remove control valve for lumbar support adjustment. → 723319 REMOVING AND INSTALLING CONTROL VALVE FOR LUMBAR SUPPORT ADJUSTMENT 

    Information 

    Only for vehicles with lumbar support.

  3. Remove lumbar support. → 723419 REMOVING AND INSTALLING LUMBAR SUPPORT 

    Information 

    Only for vehicles with lumbar support.

  4. Remove motor for lumbar support. → 723619 MOTOR FOR LUMBAR SUPPORT 

    Information 

    Only for vehicles with adaptive sports seats.

  5. Remove air cushion for backrest. → 721719 REMOVING AND INSTALLING AIR CUSHION FOR BACKREST 
scientia non olet · About LEMON Manuals