LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 721955 Replacing Backrest Frame (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Disassembling Backrest Frame >> Removing Inner Spring On Backrest Frame

Removing Inner Spring On Backrest Frame

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disengage tension springs -1-  at left and right on inner spring -2-  (-arrows A-  ).
    Fig 1: Removing Inner Spring On Backrest Frame
    G09829574Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unclip inner spring -2-  on backrest frame at the drive shaft -arrow B-  and remove inner spring.
  3. Disengage tension springs -1-  on the backrest frame.
scientia non olet · About LEMON Manuals