Installing Supports For Backrest Side Parts

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information

Observe hose routing!

In vehicles with lumbar support, make sure the hoses are routed correctly in the area of the backrest side support.

Insert support for left backrest side part -2- and secure with the fastening screws -1- .

Fig 1: Installing Support For Left Backrest Side Part
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Route wire harness for side airbag -1- as shown behind the backrest side part support -2- .

Fig 2: Identifying Routing Wire Harness For Side Airbag
Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information

Observe hose routing!

In vehicles with lumbar support, make sure the hoses are routed correctly in the area of the backrest side support.
Insert support for right backrest side part -2- and secure with the fastening screws -1- .

Fig 3: Installing Support For Right Backrest Side Part
Courtesy of PORSCHE CARS NORTH AMERICA, INC.