LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 721955 Replacing Backrest Frame (Air-Conditioned Comfort Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0, Gt3, Gt2, Gt3 RS, Gt2 RS) >> Disassembling Backrest Frame >> Removing Backrest Frame

Removing Backrest Frame

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Information 

Two persons are needed to remove and install the backrest frame.

  1. Hold backrest frame -3-  upright.
    Fig 1: Removing Backrest Frame
    G09829596Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Unscrew fastening screws -1-  at the left and right and remove support panel -2-  (-arrow A-  ).
  3. Lift backrest frame -3-  up out of the seat frame -arrow B-  .
scientia non olet · About LEMON Manuals