LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 721955 Replacing Backrest Frame (Air-Conditioned Comfort Seat) (Except "Sport Classic", Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0, Gt3, Gt2, Gt3 RS, Gt2 RS) >> Assembling Backrest Frame >> Installing Inner Spring On Backrest Frame

Installing Inner Spring On Backrest Frame

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engage tension springs -1-  in the backrest frame.
    Fig 1: Engaging Inner Spring On Backrest Frame
    G09829601Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Clip in inner spring -2-  on lower part of backrest frame at the drive shaft -arrow A-  .
  3. Engage tension springs -1-  in the inner spring -2-  on the backrest frame -arrow B-  .
scientia non olet · About LEMON Manuals