Removing Air Cushion For Backrest: Notes

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Installation Position Of Air Cushion For Backrest

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Remove the two tie-wraps -1- .

Fig 2: Pulling Off Hoses On Air Cushion For Backrest
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pull off the two hoses for the air cushion for backrest -2- at the branch piece -3- .
Push out the pins -2- on the two expanding clips -1- (-arrow A- ) and remove the expanding clips -1- .

Fig 3: Removing Air Cushion For Backrest
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove air cushion for backrest -3- (-arrow C- ).
Pull air cushion for backrest -1- together with the hose out of the backrest frame.

Fig 4: Pulling Out Hose
Courtesy of PORSCHE CARS NORTH AMERICA, INC.