LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 721619 Removing And Installing Control Module Trim Panel (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Installing Control Module Trim Panel >> Installing Control Part Trim Panel (Mechanical)

Installing Control Part Trim Panel (Mechanical)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect electrical plug connection 10  .
    Fig 1: Connecting Electrical Plug Connection
    G09829555Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Procedure: Installing control part trim panel, work step 2, 3,  4
  3. Position lever 9  on seat, screw down fastening screw 8  . → Tightening torque: 4.5 ftlb. 
    Fig 2: Screwing Down Lever
    G09829556Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Press in trim panel.
    Fig 3: Pressing In Trim Panel
    G09829557Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals