Removing Air Cushion For Seat

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Installation Position Of Air Cushion For Seat

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Unscrew the two fastening screws -1- on the holder -2- .

Fig 2: Loosening Holder With Air Distribution Valve
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Set holder -2- with air cushion control valve aside.
Pull the white hose -1- off the air cushion control valve.

Fig 3: Pulling Hose Off Air Cushion Control Valve
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Fold air cushion for seat -1- aside -arrow A- and unscrew the two fastening screws -2- on the air cushion supporting plate -3- .

Fig 4: Unscrewing Fastening Screws On Air Cushion Supporting Plate
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove air cushion supporting plate -3- (-arrow B- ).
Push the pins -2- of the two expanding clips -1- back -arrow A- and remove the expanding clips -1- (-arrows B- ).

Fig 5: Removing Air Cushion For Seat
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Remove air cushion for seat -3- .