Installing Guide Rail (Passenger Seat With Seat Occupancy Detection)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.

Position outer guide rail -2- on the seat mounting -arrow A- and lock it.

Fig 1: Installing Guide Rails
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Position inner guide rail -1- on the seat mounting -arrow B- and lock it.
Move guide rail -1- and -2- to the front-most position (parallel) until they engage securely by pressing -arrow A- the lever -3- (-arrow B- ).

Fig 2: Adjusting Guide Rails
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Grease inner -1- and outer guide rail -2- at the contact points (fore/aft adjustment lever).

Fig 3: Greasing Contact Points
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Install fore/aft adjustment lever.

Fig 4: Installing Fore/Aft Adjustment Lever
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
1. 5.1. Engage fore/aft adjustment lever -4- at the inner guide rail -5- (-arrow A- ).
2. 5.2. Move outer guide rail -3- by sliding in the seat mounting -2- until the guide rail is connected to the fore/aft adjustment lever -4- (-arrow B- ).
3. 5.3. Close locking mechanism -1- on the seat mounting -2- (-arrow C- ).
Engage locking spring -1- on the fore/aft adjustment lever -2- (-arrow- ).

Fig 5: Engaging Locking Spring
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Engage tension spring -1- on the outer guide rail -2- (-arrow- ).

Fig 6: Engaging Tension Spring
Courtesy of PORSCHE CARS NORTH AMERICA, INC.