LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 720955 Replacing Seat Frame (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Assembling Seat Frame >> Installing Frame For Seat Surface

Installing Frame For Seat Surface

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position frame for seat surface -3-  on the seat frame -4-  (-arrow A-  ), press it upwards -arrow B-  and screw down the fastening screws -2-  .
    Fig 1: Installing Frame For Seat Surface
    G09829504Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Press in new retaining pins -1-  at the left and right.
scientia non olet · About LEMON Manuals