LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 720955 Replacing Front Seat Frame (Bucket Seat) (Gt2, Gt3, Gt3 RS, Gt2 RS) >> Installing Front Seat Frame (Bucket Seat)

Installing Front Seat Frame (Bucket Seat)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position both adapters -2-  on the seat frame -3-  and secure with the fastening screws -1-  . → Tightening torque: 24 Nm (18 ftlb.)+/-3 Nm (+/-2.0 ftlb.) 
    Fig 1: Installing Seat Frame
    G09829490Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Position bucket seat on the adapters -2-  and secure with the fastening screws -1-  . → Tightening torque: 24 Nm (18 ftlb.)+/-3 Nm (+/-2.0 ftlb.) 
    Fig 2: Installing Seat Frame And Adapters
    G09829491Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals