LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 720155 Disassembling And Assembling Bucket Seat (Gt2, Gt3, Gt3 RS, Gt2 RS) >> Disassembling Bucket Seat >> Removing Cover For Seatbelt Support (Bucket Seat)

Removing Cover For Seatbelt Support (Bucket Seat)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Bucket Seat
G09829452Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Unscrew fastening screws -1-  and remove rear section of cover for seatbelt support -2-  (-Arrow A-  ).
    Fig 2: Removing Cover For Seatbelt Support
    G09829453Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Pull cover for seatbelt support -3-  forward and remove it -Arrow B-  .
scientia non olet · About LEMON Manuals