LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 720155 Disassembling And Assembling Bucket Seat (Gt2, Gt3, Gt3 RS, Gt2 RS) >> Assembling Bucket Seat >> Installing Cover For Seatbelt Support (Bucket Seat)

Installing Cover For Seatbelt Support (Bucket Seat)

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Bucket Seat
G09829462Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Position front section of cover for seatbelt support -3-  on the bucket seat from the front -Arrow A-  .
    Fig 2: Installing Cover For Seatbelt Support
    G09829463Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Position rear section of cover for seatbelt support -2-  on the bucket seat from behind -Arrow B-  and use fastening screws -1-  to secure it to the front section of the cover for seatbelt support -2-  .
scientia non olet · About LEMON Manuals