LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 720119 Removing And Installing Front Seat (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Removing Front Seat >> Undoing Seat Screws At Front

Undoing Seat Screws At Front

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Front Seat
G09829425Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Move seat -1-  to its rear limit position and undo the front fastening screws -2-  from the right and left seat rails -3-  .
    Fig 2: Removing Seat Screws At Front
    G09829426Courtesy of PORSCHE CARS NORTH AMERICA, INC.