LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 720119 Removing And Installing Front Seat (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Removing Front Seat >> Releasing Electrical Wire

Releasing Electrical Wire

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Front Seat
G09829429Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Disconnect battery. → 2706IN WORK INSTRUCTIONS AFTER DISCONNECTING THE BATTERY
  2. Tilt seat backwards.
    Fig 2: Releasing Electrical Wire
    G09829430Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Unclip wiring harness -1-  .
scientia non olet · About LEMON Manuals