LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (72 - Seat Frames -- CARRERA (997)) >> WM 720119 Removing And Installing Bucket Seat (Gt2, Gt3, Gt3 RS, Gt2 RS) >> Installing Bucket Seat >> Locking Plug Connection On Bucket Seat

Locking Plug Connection On Bucket Seat

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Overview Of Bucket Seat
G09829404Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  1. Fit bucket seat into the vehicle and tilt it backwards.
  2. Insert the connector -1-  (-arrow A-  ) and lock the plug connection -2-  (-arrow B-  ).
    Fig 2: Locking Plug Connection
    G09829405Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals