LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (68 - Interior Equipment -- CARRERA (997)) >> WM 683037 Disassembling And Assembling Cup Holder (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Subsequent Work

Subsequent Work

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install molding for dashboard (cup holder). → 705819 REMOVING AND INSTALLING TRIM STRIP FOR THE INSTRUMENT PANEL
  2. Install cup holder. → 683019 REMOVING AND INSTALLING CUP HOLDER 
scientia non olet · About LEMON Manuals