LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2016 >> 911 Turbo, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (68 - Interior Equipment -- CARRERA (997)) >> WM 681919 Removing And Installing Cover For Centre Console (Except Turbo S Coupe "Ed. 918 SPYDER", CARRERA 4 GTS, Turbo S CABRIO "Ed. 918 SPYDER", CARRERA 4 GTS CABRIO, Gt3 RS 4.0) >> Removing Cover For Centre Console >> Removing Frame

Removing Frame

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 Porsche 911, 2012 Porsche 911, 2011 Porsche 911, 2010 Porsche 911, and 2009 Porsche 911. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the fastening screws -1-  and lift the frame -2-  up and off -arrow-  .
    Fig 1: Removing Frame
    G09827181Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Check fastening clamp and replace if necessary.
scientia non olet · About LEMON Manuals